The oxygenation systems are easy to install and are fitted after your pump and filter on the return line into the pool. Please click here for an animation.

With self-cleaning anodes, automated oxidation and adjustable ionization output, maintaining an e-clear oxygen swimming pool is simple and hassle free.

 

Getting Started

 


 
Installation
 
e-Clear oxygenation systems can be installed in existing as well as new swimming pools.

The oxygenation systems are easy to install and are fitted after your pump and filter on the return line into the pool. Please click here for an animation.

All e-clear systems come with full installation and commissioning instructions.
 

 
Maintenance
 
With self-cleaning anodes, automated oxidation and adjustable ionization output, maintaining an e-clear oxygen swimming pool is simple and hassle free.

Your maintenance regime includes the following:

1. Back wash and rinse filters (e-clear recommends you back wash to irrigation)

2. Ensure neutral pH is maintained, i.e. between pH 6.8 - 7.2. This can be adjusted manually or automated. No alkaline management is required. Pool acid, food grade HCL or citric acid can be used to adjust pH. With high dissolved oxygen levels, e-clear pools require ~10-fold less pool acid than chlorine or salt pools and since the reaction goes to completion immediately, water remains chemical free.

3. Ensure copper levels are maintained at 0.5ppm.

All e-Clear oxygenation systems include an easy to use copper test kit and full maintenance instructions.
 

 
Warranty
 
All e-Clear systems are ISO rated and individually quality and pressure tested (16 Bar) before leaving the factory. All units come with a standard 3-year factory warranty.

e-Clear oxygen anodes come with a 5-year warranty and do not need to be replaced.

e-Clear ionization anodes are self-sacrificing and need to be replaced when plates wear down from 10mm to 3mm. Ionization anodes typically last between 1-3 years depending on body loads and usage.
 

The e-Clear technology is effective against E.coli, Coliforms, Enterococci, Pseudomonas, Giardia, viruses, algae and chlorine resistant organisms such as Legionella and Cryptosporidium.


     
How it works The benefits How we compare
e-Clear specializes in chemical free water sanitation. We have over 20 years experience in water sanitation for commercial and domestic swimming pools as well as water purification for commercial clients and whole households. e-Clear continuously invest in research and development to provide innovative solutions to purify and sanitize water without the need for harmful chemicals. e-Clear oxygen water sanitation systems are manufactured in South Africa, Cape Town. An international patent for the 100% chlorine free freshwater oxygen technology was obtained in 2003 and launched internationally with huge success.
The e-clear Oxygenation provides 4 levels of water sanitation, making it the most advanced non-toxic sanitation technology currently available for swimming pools and drinking water. more... With Oxygen enriched mineral water for your swimming pool rather than harmful chemicals or salt chlorination, the benefits are obvious. Healthy, Eco-friendly, Water-wise, Hassle free, Cost-effective, more... To see how the patented e-clear oxygenation technology differs from chlorine, bromine, salt chlorinators, ozone, ultraviolet (UV) and Ionization systems, click here for more...
     
Contact Us Site Map Home